Glue manufacturer shares that instant drying glue instantly adheres without whitening
Instant Dry Adhesive Test Project: Lampshade Material: PC/ABS+PP Requirements: Pulling force of 30N, high temperature storage of 70 degrees, drop test of 1.5M Adhesive Process: Hand glued DM5923 is a high viscosity product that can be used for precision and slightly lower fitting parts, as well as for porous surfaces. The relatively low viscosity grades of DM.5901 and DM.5922 have slower flowability and are particularly used for handicraft applications in the jewelry and cosmetics industries.
DM5300 Adhesive: PC and Special Difficult to Stick Materials
Instant dry adhesive bonding 3C product testing: bonding material: PC+special difficult to bond material bonding requirements: rapid curing; High intensity; Low whitening; Characteristics of adhesive products: Small adhesive area, moderate dispensing amount required; The contact surface is an inclined surface, pay attention to the direction of glue flow; Bonding process: manual dispensing Note: 5150 primer DM5300 quick drying adhesive can also be used for bonding stainless steel and stainless steel Items: electronic cigarette material: stainless steel bonding requirements: strong bonding force, sealing bonding process: manual dispensing, machine dispensing instant drying adhesive DM.5300 is suitable for bonding most elastomers of any combination, a fast curing cyanoacrylate adhesive, and suitable for bonding solidified rubber and foam rubber, with good resistance to humidity and alternate weather conditions. Special properties: suitable for most elastomers (solid rubber or foam rubber) Especially suitable for: SBR/EPDM， It has good anti-aging and weathering resistance.
Black quick drying adhesive has DM5880: adhesive speaker speaker speaker: metal and rubber DM5800 adhesive plastic and aluminum alloy:
Black instant dry adhesive with DM5880 product parameters Chemical matrix: Ethyl Color: Black Viscosity: 300-500mPa. s Density: 1.06g/cm ³ Temperature range: -55 ℃ to+120 ℃ Melting point:+165 ℃ Flash point: 87 ℃ Tensile elongation at break:>8% Shore hardness: 65-75 Curing time: Metal: 25-45S rubber:< 25S complete curing: 24h tensile shear strength: metal:> 20N/mm²
Glue manufacturer shares that instant drying glue instantly adheres without whitening
Factors affecting adhesives
1. Substrate (surface energy) 2 Surface roughness/gap 3 Surface pollution 4 Time 5 Temperature 6 Pressure 7 Humidity 8 Chemistry 9 Ultraviolet rays, these all affect the choice of glue. If you can explain how to apply them, we can help you match a better solution
In addition, adhesion, adaptability, pressure resistance, impact resistance, substrate surface, curing speed are also factors to consider when choosing adhesive
Factors influencing adhesive selection
1. Adhesion
2 Adaptability
3. Stress resistance
4. Impact resistance
5. Surface of substrate
6 Curing speed
Factors affecting the selection of adhesives
1. Substrate (surface energy)
2. Surface roughness/gap
3. Surface pollution
4. Time
5. Temperature
6. Pressure
7. Humidity
8. Chemistry
9. Ultraviolet radiation
Please state what product the adhesive is used to bond and under what conditions. Next, I will help you match a better adhesive solution
