Glue manufacturer shares customer request for aluminum adhesive aluminum glue project
1. Resistant to cold shock
2. Anti vibration
3. Adhesive strength should be able to replace welding
4. Urgent mass production is needed, and successful cooperation cases are required for adhesive application. According to the bonding requirements, our adhesive engineers recommend DM6751, an acrylic two-component AB structural adhesive. This adhesive has been purchased and used by a large direct group for a long time, and its quality is stable and reliable!
We have already made a one-time purchase of 1000 units! Recommended reading: AB glue with strong metal adhesion, DM metal welding, AB glue can quickly bond various metal materials such as steel, iron, aluminum, titanium, stainless steel, etc. at room temperature (25 ℃). It is easy to use and has a wide range of applicability. After curing, the adhesive film has good toughness, strong impact and shear resistance, and good weather resistance. Suitable for adhesive manufacturing and emergency repair of metal products, tool industry, electromechanical industry, chemical pipelines, automotive water tanks and oil tanks, with excellent results. 5-10 minutes for the adhesive to solidify, 1 hour to reach usable strength, and 24 hours to achieve optimal results. Can be used between -40 ℃ and 110 ℃.
Precautions for using aluminum adhesive:
1. Maintain ventilation in the workplace and avoid contact with children.
2. If skin or eyes are touched during operation, immediately rinse with clean water or seek medical attention.
3. Do not mix up the bright glue solution before use, and do not cover the glue incorrectly after use.
4. Store in a cool, dry, well ventilated place and keep away from high temperatures.
5. When using in bulk, please conduct experiments first to avoid affecting the bonding effect due to improper operation.
6. Clean the surface of the bonded object of moisture, dust, oil stains, rust, and other dirt, keeping it clean, dry, and flat.
7. When using, mix and stir A glue and B glue in a 1:1 ratio, apply them evenly to the surface of the bonded object, and try to achieve rotational fit during bonding. The glue solution will solidify for 5-10 minutes, reach usable strength within 1 hour, and achieve the best effect within 24 hours. Can be used between -60 ℃ and 100 ℃. (Do not mix a large amount of adhesive solution at once)
Glue manufacturer shares customer request for aluminum adhesive aluminum glue project
