What are the advantages of using methyl acrylic structural adhesive on adhesive websites
1. Strong adhesion to various materials (aluminum, steel, brass, most plastics, composite materials, etc.)
2. High tensile shear strength, impact and peel resistance, and ability to fill large gaps
3. Good resistance to moisture, solvents, and weathering
4. Fast fixation at room temperature and shorter curing time
5. Some grades do not require or require minimal surface pre-treatment. 1: A mixing ratio of 1 or 10:1 is very convenient.
Types of methyl methacrylate structural adhesive:
DM6751 is a paste like, fast curing structural adhesive based on improved acrylic ester, containing two components, suitable for bonding most plastics and metals or related composite materials. When the product is used in a 10:1 ratio, depending on temperature conditions, it will take 5 minutes of construction time and about 10 minutes at room temperature to obtain a fully cured strength of 75% DM6751. DM6751 shows particularly strong adhesion to thermoplastic materials, with high strength and toughness that can bond difficult to bond materials. When the gap is 1-15mm, good strength can be obtained. The construction time of this product is slightly longer than that of DM01615.
DM1610 is a paste like ultra fast curing structural adhesive based on improved acrylic ester, containing two components, suitable for bonding most plastics, metals, or related composite materials. Typical application areas include household appliances (such as dishwashers, refrigerators, washing machines, and dryers), metal and plastic labeling, outdoor displays, tables and cabinets, automobiles, transportation and construction equipment, electronic and electrical engineering (magnets inside electric motors), door and window production, general machine construction, etc.
When the product is used in a 10:1 ratio, depending on the temperature conditions, it will take 3 minutes for the product to be applied and approximately 10 minutes at room temperature to achieve 75% of its fully cured strength; DM1610 exhibits particularly strong adhesion to thermoplastic materials, combining high strength and toughness to bond materials that are difficult to bond. When the gap is 15m, good strength can be obtained. DM1307 acrylic structural adhesive, a low odor and fast curing adhesive composed of two components, is suitable for bonding metals such as aluminum, steel, brass, and most plastics or any combination of these materials. After mixing, the product will solidify into a non peeling, high-strength, and tough adhesive, exhibiting high impact and peel resistance.
What are the advantages of using methyl acrylic structural adhesive on adhesive websites
DM6751 structural adhesive:
This fast curing product is suitable for bonding metals such as aluminum steel, brass, and most plastics such as ABS, hard PVC, PMMA, PC, GRP, or any combination of these materials. DM6751 is similar to egre1907, but has higher viscosity, high temperature resistance, and higher tensile shear strength. DM 1950 is a structural adhesive composed of two components, suitable for bonding thermoplastic and metal, or any combination of these materials. This product perfectly combines high strength and toughness, and can bond various materials with different properties. It has excellent shear strength, peel resistance, and impact resistance. At the same time, the product has strong adhesion to materials that are difficult to bond, and can resist weathering and moisture. DM1955 is a structural adhesive composed of two components, suitable for bonding thermoplastic and metal, or any combination of these materials. This product is similar to 1955, but has higher construction temperature and tensile shear strength.
DM1990 is a fast curing high viscosity structural adhesive composed of two components. This product is particularly suitable for joining steel, stainless steel, aluminum, or any combination of these materials. This product has good resistance to weathering, moisture, and environmental impact, and can fill gaps up to 8 centimeters. DM1995 is a medium viscosity structural adhesive composed of two components, with similar characteristics to DM01990, but with longer construction time, slightly lower tensile and shear strength, and the ability to fill gaps up to 12mm. These adhesives are usually delivered in simple double tube shells and can be applied manually or with pneumatic hand-held glue guns.
Application of acrylic structural adhesive:
These products are suitable for high-strength bonding of various materials and have a wide range of applications in mechanical engineering, shipping, automotive, transportation, furniture, home appliances, electrical/electronics, amplifier assembly, and other fields.
