Shenzhen glue manufacturer glue adhesive iron and PVC123
What glue is good for sticking iron and PVC? Without a doubt, choose our metal adhesive!
What are the advantages of using metal glue for bonding board iron and PVC adhesive
1. Medium viscosity, will not corrode PVC plastic;
2. Good initial adhesion, even after applying glue, it will not peel off immediately;
3. The initial curing time is 5-8 minutes, used for bonding iron plates and PVC plastics, which can achieve the strength of breaking PVC plastics without delamination;
4. After curing with DM adhesive metal glue, the film is soft and elastic, which will not affect the elasticity and toughness of soft PVC plastic. It can withstand temperatures from -30 ℃ to+80 ℃;
5. Passed EU REACH 191 tests and meets environmental standards; Recommended reading: Welding adhesive DM1307: Metal bonding can replace welding, a strong adhesive for metal bonding
Before applying DM adhesive to iron and PVC, attention should be paid to:
1. Before sticking metal adhesive, it is necessary to clean the surface of PVC plastic and iron plate of oil stains, dust, rust, etc. to ensure the bonding effect;
2. Smooth iron plate surfaces can be roughened and cleaned with industrial alcohol solvents;
3. Apply PVC plastic adhesive and metal glue evenly to the two bonding surfaces, let it dry for 3-5 minutes (based on whether it is sticky by hand);
4. Align and compact the two bonding surfaces, and it takes 24 hours to reach maximum strength; 5. The initial adhesion of PVC plastic to metal adhesive is relatively good, and after applying the adhesive, it can be directly bonded. If the curing time needs to be extended, it can be heated to 50-60 degrees to effectively shorten the curing time and improve the adhesion of PVC plastic to metal.
Metal iron adhesive PVC warm reminder:
1. Excessive application of glue can lead to wastage of adhesive and affect the adhesion strength and curing time;
2. It is important to ensure that the surfaces of PVC and iron plates are free of dust, oil stains, release agents, etc., and to keep the bonding surface clean and dust-free; 3. The adhesive used for bonding metal and PVC with DM may corrode paint or ink, affecting the bonding effect.
4. For bonded objects, applying heavy pressure or fixing them for a period of time yields better results.
5. Do not let children come into contact with DM adhesive metal glue, keep it away from sources of fire and heat, and store it in a sealed and cool place at room temperature. Whether it’s bonding metal iron or plastic PVC, choosing DM glue is guaranteed!
