Adhesive manufacturers bond iron and iron adhesive, strong adhesive acrylic structural adhesive
The adhesive used to bond iron and iron can replace welding with metal adhesive. It has high bonding strength, high temperature resistance, low odor, and is environmentally friendly. The metal adhesive DM6751 is essentially an acrylic structural adhesive, which is a 1:1 combination. This adhesive can form a tough and durable bond on metals, including pure iron, aluminum, galvanized and electroplated steel plates, electrodeposited coated steel, glass, engineering plastics, ceramics and composite materials, or any combination of materials. Glue iron, glue gold
Adhesive iron and iron glue have good chemical resistance and are suitable for use in environments where parts are subjected to thermal cycling, dynamic loads, moisture resistance, and weathering resistance.
Instructions for using adhesive for bonding iron and iron metal:
1. After unpacking the DM acrylic structural adhesive, you will see two sets of glue together. The DM acrylic structural adhesive is used by mixing the glue with a mixing nozzle.
2. The function of the mixing nozzle and glue gun is that the mixing nozzle mixes AB glue when the glue gun is used to apply glue, and the glue produced is already evenly mixed.
reminder:
1. When using DM glue, the glue that has just been opened is usually not stirred evenly. Do not stick the glue that was previously applied to the product. When opening, remove a small amount of glue to bond the product. 2. When bonding, it is important to pay attention to the cleanliness of the bonded product. When the adhesive is attached to the product, the initial curing time of the adhesive must be clear. During the initial curing time, the shape of the product must be maintained and not deformed during bonding.
Detailed parameters for bonding iron and iron metal adhesive:
Chemical composition: Modified acrylic ester, methyl methacrylate ester Product viscosity: 18000Mpa. s Color after mixing: dark green Mixing volume ratio: 1:1 Density: 1.06-1.14g/cm3 Construction time: 2-3 minutes Initial curing: 10 minutes Complete curing: 24-hour gap filling: 1mm Temperature resistance range: -40 ℃ to+110 ℃ Tensile strength:> 21N/mm2 elongation at break:~20% Impact resistance:> 20KJ/m2 peel strength:> 40N/cm aluminum/aluminum:> 20N/mm2 steel/steel:> 22N/mm2 steel/glass:> 20N/mm2 copper/brass:> 22N/mm2 DM1307 industrial adhesive not only can bond metals, but also has a very good effect on bonding other materials.
Welcome new and old customers to call us for inquiries. We support small batch production and customized appearance. We will provide you with 1V1 technical consulting services for free! We have a research and development center of over 3000 square meters in the Shenzhen Guangming Pilot Industrial Base. Our research and development center has 12+laboratories. We welcome new and old customers to call us for consultation. We have strong research and development capabilities and are a trusted manufacturer. Please feel free to call or contact us sales@molddl.com Consultation, please contact us for free samples!
This article is included in Baidu Wenku
Our company supports small batch customization, packaging design, and contract processing
