Industrial glue instant drying glue 123, ranked among the top ten glue brands
Instant dry glue is a type of adhesive product composed of a single component, solvent-free, and has an extremely fast curing speed, which can meet the highest industrial application requirements. Their outstanding features include two points: they can cure at room temperature at an extremely fast speed within seconds; Widely applicable Instant dry glue was introduced in the 1950s and was initially referred to as “super glue”.
Since then, these products have added many improved properties, such as higher peel strength, higher flexibility, higher impact resistance and thermal resistance, and are suitable for more types of surfaces, to name a few. Application areas: DM instant adhesive is used for component bonding in automotive, beauty, consumer goods, electrical and electronic products, machinery, medical equipment, military, lead, transportation industry, maintenance and repair, and other fields. They can bond various types of materials, including metal, plastic, elastomer, wood, stone, ceramic, leather, fabric, or any combination of these materials To achieve optimal performance, the joint surface must be clean and free of any contaminants such as dirt, oil stains, lubricants, and any products previously applied.
Before joining, lightly scratch the surface to achieve optimal results. We recommend using DM.9195 cleaner for surface cleaning of glass and plastic, and DM.9190 cleaner for metal. If mechanical pretreatment such as grinding, sanding, sandblasting, etc. can be carried out, it will greatly optimize the adhesion surface. Elastic bonding requires a freshly cut surface to ensure perfect bonding.
The talcum powder on the bonding surface should also be removed. The adhesive should be applied drop by drop directly from the original container or through another adhesive device such as a nozzle or sprayer on a surface. Excessive use of adhesives should be avoided. Immediately assemble the parts and apply slight contact pressure until the initial fixation is completed. Ensure proper alignment of parts. Do not move parts before obtaining initial fixation.
The use of DM. 9150 stripping agent can remove cured cyanoacrylate from most substrates, allowing for disassembly of parts Curing mechanism DM. Instant dry adhesive can be rapidly cured at room temperature through ion polymerization caused by the absorption of moisture or alkaline substances on the surface. Acidic surfaces can delay or prevent curing, while more alkaline or alkaline surfaces can accelerate curing. in general.
The environmental humidity in the air and at the joint surface is sufficient to trigger curing. Therefore, the parts should be quickly connected. To achieve reproducible curing speed and strength, it is recommended to ensure that the environmental conditions remain unchanged. The optimal humidity should be between 40% and 75%, and the temperature should be 23 degrees Celsius. Humidity below this range will slow down curing, while higher humidity will accelerate curing. To achieve rapid curing, it is best to make the thickness of the bonding wire very small. Avoid seams larger than 0.2mm. If it cannot be avoided or if there are other situations that slow down the curing process, using DM-5100 accelerator can be very helpful.
Whitening phenomenon: Like any liquid, instant dry glue has vapor pressure, which means it begins to evaporate at room temperature. Due to the fact that stabilizers with lower vapor pressure do not evaporate and remain in the adhesive, the evaporated cyanoacrylate molecules are extremely active. These evaporated molecules will form solids near the bonding line on the substrate surface, appearing as white spots. To minimize this phenomenon, it is recommended to reduce the amount of adhesive used as much as possible, ensuring sufficient humidity and ventilation. Durable curing DM Instant dry glue has strong resistance to many common solvents. However, it is not resistant to acetonitrile, ketones (such as acetone), esters, nitromethane, and bases.
Industrial adhesive instant drying adhesive 123
According to the type of product used, the operating temperatures for the combined parts are -30 ° C to 80 ° C, with special grades ranging from -55 ° C to+120C. Storage and Shelf Life: Instant Dry Adhesive Store the product in an unopened container in a cool and dry environment. The optimal storage temperature is+2C to+8C. Under the above storage conditions, the shelf life varies from 6 to 12 months depending on the type of product. When removing the product from the refrigerated environment, allow the adhesive to reach room temperature before use. To learn more about instant dry adhesive, please visit www.aicarder.com.
Welcome new and old customers to call us for inquiries. We support small batch production and customized appearance. We will provide you with 1V1 technical consulting services for free! We have a research and development center of over 3000 square meters in Shenzhen Guangming Pilot Industrial Base, with 12+laboratories. We welcome new and old customers to inquire by phone. Our company supports small batch customization and packaging design,
We have strong research and development capabilities and are a trusted manufacturer. Welcome to call or sales@molddl.com Consultation, please contact us for free samples!
This article is included in Baidu Wenku
Our company supports small batch customization, packaging design, and contract processing
