Two component epoxy resin structural adhesive DM6010 is a bonding metal structural adhesive
DM-6010 is a two-component epoxy resin structural adhesive that can be cured and positioned within 1 hour, and fully cured within 24 hours. After complete curing, it has the characteristics of high shear, high peeling, and good impact resistance. Suitable for bonding most metals, ceramics, rubber, plastics, wood, stone, etc.
Product information for bonding metal structural adhesive
| Technology | epoxy | |||
| appearance | Transparent liquid | |||
| consist of | two-component | |||
| Mix Ratio | 1:1 | |||
| Curing Method | Mixing at room temperature | |||
| Product Features | High shear, corrosion-resistant, waterproof, excellent resistance High and low temperature performance |
|||
| application | Suitable for most metals, ceramics, rubber, plastics, wood, stone, etc., with excellent adhesive strength | |||
Technical performance of bonding metal structural adhesive products
| project | unit | numerical value | ||
| appearance | – | Transparent liquid | ||
| proportion | AComponents | g/cm3 | 0.98～1.07 | |
| BComponents | g/cm3 | 0.98～1.07 | ||
| Viscosity | AComponents | cps | 5000~8000 | |
| BComponents | cps | 5000~7000 | ||
| Initial solidification time | H | 1 | ||
| hardness | Shore D | 80~85 | ||
| shear strength | MPa | ≥16 | ||
| operation temperature | ℃ | -40~90 | ||
Precautions for using adhesive for bonding metal structures
1. The storage temperature of the hose should be below 28 ℃ to avoid direct exposure to light.
2. After using the rubber hose, it is necessary to cover the tube again to prevent the product from being exposed for a long time and affecting the bonding strength.
3. Excess glue on hands or adhered objects can be cleaned with alcohol or acetone before curing.
4. Strictly prevent children from coming into contact and do not enter.
